The spray filling machine is suitable for filling various viscosity liquids. The unique manipulator and guiding mechanism ensure that the spray cap reliably enters the bottle mouth. The filling needle sneaked into the bottom of the bottle and slowly rose to prevent foaming. The filling and capping unit is integrated, and the economical application space is small. The claw type flexible capping head and elastic adjustment are arbitrarily adjusted. Because in the process we usually use, it will inevitably cause serious damage to the spray filling machine due to improper use, but how can we avoid this unnecessary thing happening? Here, Shanghai Shengcai Machinery will explain to you how to maintain some spray filling machines during installation!
First, the spray filling machine must first use the rocking handle to turn the machine to see if it is abnormal, and it is true that the car can be driven normally. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.
Second, every time the machine is adjusted, be sure to tighten the loose screws. Rotate the machine with the rocker to see if the motion meets the requirements before driving. The machine must be kept clean. It is strictly forbidden to have oil, liquid or glass debris on the machine to avoid damage to the machine. Therefore, it is necessary to remove the liquid or glass debris in time during the production process.
Third, the machine surface should be cleaned once before the shift, and clean lubricants should be added to each activity department. It should be scrubbed once a week, especially in areas that are not easily cleaned during normal use or blown off with compressed air.
Fourth, after the machine is unpacked, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time. Install and adjust the feed and discharge components according to the outline drawings in this manual. Add new lubricant to each lubrication point. Use the rocker to turn the machine to check that the machine is running in the right direction and the machine must be protected from ground.